Optimized Process Has Custom Burners Specifically made for Tire to fuel processes able to outperform any Industrial burners in both price and output . Our burners can Heat up rotary pyrolizers or rotary kilns in half the time of conventional Diesel or oil burners . Our burners will not go out as long as constant filtered fuel is fed to the burners and air is maintained . Our burners burn all fuels and if you burn the diesel produced at the plant you dont even need a combustion chamber , just the nozzle . See here https://www.youtube.com/watch?v=aoYUxVBc4og
This is a test video for a Client in Africa
https://www.youtube.com/watch?v=7zi-7xGhSFQ
Below we see Pics of a test using diesel fuel .
Most tire to oil plants use the fuel they manufacture to heat the pyrolizers and its quite flammable. So in effect you don’t need a combuster or Pre burner as i call them for a fuel this flammable .
However we can run a very hot lean burn with the preburners and produce a high velocity flame . The Pics below are only using 10 scfm of compressed air at 40 psi. Adding more air will increase output . Because of the siphon action of the air you dont need a fuel pump .
Nozzle in picture may vary according to supply of parts or design improvements
See this Industrial burner in action https://www.youtube.com/watch?v=UMVRWDKOpzg
NEXT
Godzilla Burner ALL Fuel Burner
